Face film
White Gloss PET Film
Face film thickness
90micron
Liner
50micron matte BOPP
180º Peel strength (24Hr)
2.5g / 25mm
Apprearance
White Gloss
Service temperature
-40ºC ~ 100ºC
Storage termperature
10ºC ~ 25ºC
Storage humidity
30% ~ 60%
Shelf life
12 months
Dimensional stability
<0.1 inch
(300ºF, 48Hr, applied to a glass)
Chemical resistance
Resistant to most mild acids, alkalis, and salt solutions
Application
Excellent for street stores window advertisement
Print Compatibility
UV digital / UV Offset
Basic Installation Instructions
1. The surface needs to be clean and free of dirt;
2. Moisture the surface first;
3. Peeling the whole liner off gently;
4. Carefully position the film so that it is properly aligned on all sides;
5. Using a fitting tool to remove air bubbles when completely removed, and the graphics is in place;
(Better to use the BOPP liner to cover on the graphics while removing air bubbles to protect the printed graphics)
6. To repostion, slowly peel off the surface;
7. Step back, and admire your work.
Guidelines
Print Tips:
Suitable printing condition: Temperature 15~30ºC
(59~86ºF) / Humidity 30% ~ 60%.
Cautions:
The graphics film can be repostioned as many times as in need, just make sure the silicone based suction layer is always free of dirt, and always keep the film flat so as not to be creased.
Once any dirt on the suction layer, small sheets can be washed by water, or use an adhesive tape to stick the dirt to renew for other format.
Better with wet mounting to remove bubbles easily.
Storage:
Store at room temperature condition of 10~25ºC
(50~75ºF), and 50% relative humidity.
We recommend that the product is always put in its original packaging.
Available Size
1370mm*50m / roll; 500*707mm/sheet; 1000*707mm/sheet