Super Cling Films GJ-120Eco-solvent is a white matte film with innovative cling technology for window graphics, printing, and sign-making needs. It is a Polyethylene (PET)  film for internal & external window graphics and displays.
GJ-120Eco-solvent doesn't rely on adhesive or static, very easy to cling onto glass, varnished wood, stainless steel, acrylic, and other very smooth surfaces.
The silicone based suction layer is low-tack, and will not leave adverse effect on applying surface, even for long term use.
GJ-120Eco-solvent is adhesive-free, smudge-free & PVC free,
100% recyclable, and therefore environmentally friendly.

Application

Excellent for street stores window advertisement

Print Compatibility

Eco-solvent / Latex / UV / Toner

Basic Installation Instructions

1. The surface needs to be clean and free of dirt;

2. Moisture the surface first;

3. Peeling the whole liner off gently;

4. Carefully position the film so that it is properly aligned on all sides;

5. Using a fitting tool to remove air bubbles when  completely removed, and the graphics is in place;
(Better to use the BOPP liner to cover on the graphics  while removing air bubbles to protect the printed graphics)

6. To repostion, slowly peel off the surface;

7. Step back, and admire your work.

Guidelines

Print Tips:
Suitable printing condition: Temperature 15~30ºC
(59~86ºF) / Humidity 30% ~ 60%.
Cautions:

The graphics film can be repostioned as many times as in need, just make sure the silicone based suction layer is always free of dirt, and always keep the film flat so as not to be creased.

Once any dirt on the suction layer, small sheets can be washed by water, or use an adhesive tape to stick the dirt to renew for other format.

Better with wet mounting to remove bubbles easily.
Storage:
Store at room temperature condition of 10~25ºC
(50~75ºF), and 50% relative humidity.
We recommend that the product is always put in its original packaging.

Available Size

1370mm*50m / roll; 320*450mm / sheet for Toner